The flagship Travel catamaran perfect for adventure and competitions
The Ducky 19 has a large load capacity, a spacious trampoline and luggage nets to comfortably accommodate a crew of 2-5 people with equipment. An expanded list of additional options is created for maximum comfort, during both extreme expeditions and family trips at southern and northern latitudes.
Also, this model may be relevant if you do not need to assemble-disassemble frequently. Although the assembly of the catamaran is not difficult, it is not rational to use it as a “weekend boat”. For these purposes, there are more suitable models – Ducky 16, Ducky 15 or Ducky 14S.
For sports enthusiasts, a racing version of the model is developed – Ducky 19R. It differs from the standard one by increased sail area and the presence of a main traveler. When needed, you can easily convert the standard version to the racing one and vice versa.
Additionally, an asymmetric spinnaker – gennaker can be installed on a catamaran. It is an effective sail for downwind courses.
Also outboard engines with a power up to 4.0 hp can be installed on this catamaran via an additional motor bracket attached to the aft beam.
TYPE | VALUE |
---|---|
Length, m | 5.94 |
Width, m | 2.87 |
Height, m | 8.0 |
Length / Width of front trampoline, m | 2.0 / 2.25 |
Length / Width of main trampoline, m | 2.0 / 2.25 |
Length / Width of back trampoline, m | 0.9 / 2.25 |
Diameter of floats, m | 0.62 |
Jib, sq.m (Ducky 19 / 19R) | 3.0 / 4.2 |
Main sail, sq.m (Ducky 19 / 19R) | 10.0 / 11.3 |
Gennaker, sq.m | 18 |
Carrying capacity, kg | 525 |
Crew, pers. | 1-6 |
Weight, kg | 115 |
Dimensions in packed condition, m | 4 Packs |
Pack no. 1 | 2.15 x 0.3 x 0.25 |
Pack no. 2 | 2.15 x 0.35 x 0.25 |
Pack no. 3 | 0.9 x 0.6 x 0.4 |
Pack no. 4 | 0.6 x 0.4 x 0.3 |
Time of Assembly / Disassembly, min | 90 / 40 |
Sail material | Dacron / Maylar |
Recommended engine power, hp (under 25kg) | 4.0 |
Boat design category (Directive 94/25/EC, 2003/44/EC and 2013/53/EU) | C |
Motor bracket is designed for mounting of outboard motor with extended deadwood (long shaft). Recommended engine power - 4.0 hp
The tiller extension is designed to control the tiller from a distance. This is a useful option that allows more effective heeling balance and maintains accurate catamaran trim (loading of stern or bow).
The mast float is an inflatable tank that prevents the catamaran from turning the mast upside down. The float will keep the catamaran on a "side position" and will facilitate the righting of the catamaran to an even keel, in case of capsizing. It will not allow the mast to sink below the surface and prevents damage. The mast float is streamlined. If necessary, it is easily mounted and dismantled without the use of tools; fixators included.
An additional strip of fabric is glued to the bottom. It is recommended for severe operating conditions, such as: a shore with sharp stones, mollusks, and other cutting and piercing elements.
Parking cover protects the catamaran from the sun, rain, dust and dirt. Essential if you're planning to leave your catamaran assembled and exposed to the elements for any period of time.
The number is made from a self-adhesive dacron. The standard symbol height is 300 mm. The price is calculated on a cost per character basis with or without a sticky back. Drawing of individual logos is also possible depending on the requirement.
Gennaker is an asymmetric spinnaker for downwind running including beam reach. A catamaran with gennaker significantly increases the speed, and in a fresh wind it can reach the hydroplaning mode. Recommended for advanced users.
Side pockets are designed to store small items, clothes and other things. Standard oars can be kept there also. The pockets are made of micro-net. They are attached to the cable-stay of starboard and port side, forming a kind of cockpit that additionally protects from wind and splashes.
There is useful option that significantly simplifies mainsail hoisting. It directs the boltrope into the mast track and eliminates sail jamming.