The smallest in the Ducky catamaran family with assembly from 25mins and 15mins disassembly!
It is intended for both children and adults who want to get acquainted with the fascinating world of sails. This is an ideal "learner" for outdoor activities, absolutely safe even with minimal control skills.
The iconic design of the Ducky 13 frame, the absence of cables, and a free-standing mast make the assembly process as simple as possible, fast and tireless. Even a beginner can assemble it in 25 minutes! When disassembled, the catamaran is very compact and can be easily transported even inside a passenger car. Depending on the configuration, the weight of a fully equipped catamaran starts at 35kg.
When designing this catamaran, special attention was paid to safety. The rig was done so that as the wind becomes stronger the mast will bend and drop the extra air off to prevent rollover. In сase of strong gusts of wind, it is enough to release the sheet and the sail will get into wind-vane position by itself.
If the catamaran somehow capsized and the sail laid down on water, then a float on the mast will serve as additional protection against a complete rollover. The crew is able to - without assistance - restore the catamaran to an even keel. The absence of a boom in the rig is another feature that makes the catamaran as injury safe as possible.
Large size of trampoline – 1.8 × 1.8 m, provides the crew with ample accommodation and can also serve as an excellent platform for sunbathing on the shore. Also outboard engine with a power of 2.2 hp can be installed on the catamaran. For this, in the additional equipment, a motor bracket is provided, which is attached to the aft beam.
TYPE | VALUE |
---|---|
Length, m | 3.9 |
Width, m | 1.9 |
Height, m | 5.2 |
Length / Width of trampoline, m | 1.8 / 1.8 |
Diameter of floats, m | 0.42 |
Main sail, sq.m | 5 |
Carrying capacity, kg | 200 |
Crew, pers. | 1-2 |
Weight, kg | 35 |
Dimensions in packed condition, m | 2 Packs |
Pack No. 1 | 1.80 x 0.25 x 0.25 |
Pack No. 2 | 0.8 x 0.4 x 0.3 |
Time of Assembly / Disassembly, min | 25 / 30 |
Sail material | Dacron / Mylar |
Recommended engine power, hp | 2.2 |
Boat design category (Directive 94/25/EC, 2003/44/EC and 2013/53/EU) | D |
Motor bracket is designed for mounting of outboard motor with extended deadwood (long shaft). Recommended engine power - 2.2 hp
The tiller extension is designed to control the tiller from a distance. This is a useful option that allows more effective heeling balance and maintains accurate catamaran trim (loading of stern or bow).
The mast float is an inflatable tank that prevents the catamaran from turning the mast upside down. The float will keep the catamaran on a "side position" and will facilitate the righting of the catamaran to an even keel, in case of capsizing. It will not allow the mast to sink below the surface and prevents damage. The mast float is streamlined. If necessary, it is easily mounted and dismantled without the use of tools; fixators included.
An additional strip of fabric is glued to the bottom. It is recommended for severe operating conditions, such as: a shore with sharp stones, mollusks, and other cutting and piercing elements.
Parking cover protects the catamaran from the sun, rain, dust and dirt. Essential if you're planning to leave your catamaran assembled and exposed to the elements for any period of time.
The number is made from a self-adhesive dacron. The standard symbol height is 300 mm. The price is calculated on a cost per character basis with or without a sticky back. Drawing of individual logos is also possible depending on the requirement.